SICK S3000 User Manual

Chapter 3 Operating instructions
S3000
16 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8009942/WK81/2012-11-28
Subject to change without notice
Product description
3 Product description
This chapter provides information on the special features and properties of the S3000
safety laser scanner. It describes the construction and the operating principle of the
device, in particular the different operating modes.
3.1 Special features
 190° scan area
 increased dust and particle tolerance due to dazzle and particle algorithms
 sensor heads with scanning ranges up to 4 m, 5.5 m or 7 m (maximum protective field
radii)
 various I/O modules for different applications
 simple replacement of the I/O module (in this way the functionality can be easily
enhanced)
 configuration using PC or notebook with SICK Configuration & Diagnostic Software
 configuration memory in the system plug. In case of device replacement, the existing
configuration is automatically transferred to the S3000 newly connected. In this way
downtimes can be significantly reduced.
 dual field mode with field sets consisting of protective field and warning field
(optional simultaneous monitoring of two field sets
1
)
)
 dual protective field mode with field sets consisting of two protective fields
(optional simultaneous monitoring of two field sets = 4 protective fields)
 triple field mode with field sets consisting of one protective field and two warning fields
 contour monitoring of a protective field
 3 universal I/O connections
 integrated external device monitoring (EDM)
 integrated restart interlock/restart interlock delay for which the parameters can be set
 safe bus interface via enhanced function interface (EFI) for operation in a system with
other safety laser scanners, with products of the sens:Control product group or with a
Flexi Soft safety controller
 compatibility mode for interoperability with safety laser scanners of an older generation
From S3000 Advanced
 up to 4 field sets
 protective field switching via static inputs or EFI
From S3000 Professional
 up to 8 field sets
 protective field switching via dynamic inputs using incremental encoders
 velocity routing using a Flexi Soft safety controller
Extended features from S3000 Expert and Remote
2)
 up to 32 field sets (in dual field mode or dual protective field mode)
 up to 21 field sets (in triple field mode)
Extended features from S3000 Expert
 CMS function for the detection of reflectors as artificial landmarks
1)
Option not available for variants with PROFINET interface.
2)
From sensor head with firmware J B02.41 and from I/O module with serial number > 11240000.

SICK S3000 Specifications

General

Brand	SICK
Model	S3000
Category	Scanner
Language	English