SICK S3000 - Page 79

Operating instructions Chapter 5
S3000
8009942/WK81/2012-11-28 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 79
Subject to change without notice
Mounting
Distance covered during the response time of the safety laser scanner
The distance covered during the response time of the safety laser scanner depends on …
 the response time of the safety laser scanner,
 the maximum velocity of the vehicle in your mobile application.
The response time T
S
of the S3000 depends on …

the multiple sampling set,

the transmission speed to external OSSDs over EFI.
See section 12.2 “OSSD response times” on page 144.
How to calculate the distance covered during the response time of the safety laser
scanner:
 Calculate the distance using the formula:
S
AnS
=T
S
× V
max
Where …
T
S
= Response time of the safety laser scanner
V
m
ax
= Maximum velocity of the vehicle from the related vehicle documentation
Supplement Z
R
for measurement errors caused by reflection
With retroreflectors in the background at a distance of less than 1 m from the boundary of
the protective field, the supplement Z
R
is 200 mm.