POLYDOROS SX 65/80
Integrated Control Console
6 / 36 AXD3-340.620.13.01.02 Operator Manual
Fluoroscopic data field
❏ Fluoroscopic data field symbol
45 kV ❏ Indicates the fluoroscopic kV values
0.3 mA ❏ Indicates the fluoroscopic mA values
0.1 min ❏ Indicates the fluoroscopic time
0%hu ❏ Indicates the tube load
µGy*cm² ❏ Indicates the dose area product
❏ Resets the fluoroscopic data (time, kV, mA) and the dose area product
(cGy*cm²)
Operating mode and
IONTOMAT data field
❏ Symbols indicate that:
direct radiographic mode is active
or
indirect radiography is active
❏ Indicates that tomographic mode is active
❏ Selects the IONTOMAT (with 3-point technique)
❏ Indicates the density compensation
❏ Adjusts the density compensation (+/- 4 exposure points)
❏ Selects the film-screen combination
– H = high sensitivity
– U = medium sensitivity
– D = low sensitivity, high detail resolution
❏ Selects the measuring field (dominant) (left, center, right, circular)
ms
+2
H U
D
To Next Page
Loading...
