Siemens AXIOM Iconos R200 - Selecting Direct Exposure Technique; Select 0-Point Technique

POLYDOROS SX 65/80
Integrated Control Console
AXIOM Iconos R200 AXD3-340.620.13.01.02 21 / 36
Selecting direct exposure technique 0
Select 0-point technique 0
❏ Setting the kV value from fluoroscopy
❏ Exposure cut-off by the automatic exposure control.
Selection ◆ Select an organ program with 0-point technique
Deselection ◆ Actuate
– the mAs button: 2-point technique is selected or
– the ms button: 3-point technique is selected
With organ program:
◆ Select an organ program without 0-point technique
Exposure data
to be set
❏ The following exposure data can be set:
– Focal spot
– Tube load
– Measuring fields (dominants)
– Film-screen combination
– Density compensation
Display of the
exposure data
❏ After the end of the exposure, the mAs and ms values in the display are flash-
ing.
100%
100%
H U
mAs
ms
kV
40
Program
Iconos
Iconos
Cassette
Cassette
0.0
Iconos BedIconos DFR
80%
D
3.4
µGy*cm
2
Info
mA
%hu
kV
45
0.3
0
min0.1
Vertix