Accessories
Standard Accessories
6 / 54 AXD3-340.620.13.01.02 Operator Manual
Removal ◆ Move the patient table to the horizontal position;
◆ Loosen the cap screws;
◆ Remove the grip protection strip from the accessory rail.
Handgrip strip
Application Handgrip strip for mounting on the front or back accessory rail to assist in posi-
tioning the patient
Attachment ◆ Move the patient table to the horizontal position;
◆ Loosen the right and left cap screws (1) on the handgrip strip;
◆ Insert the handgrip strip in the accessory rail and push it into position;
Warning
The grip protection strip is intended for the safety of the patient in the prone po-
sition. To prevent injury to the hands when moving the tabletop, make sure that
the patient uses the grip protection strip and not the head end or the side edge
of the tabletop.
1
To Next Page
Loading...
