Accessories
Optional Accessories
AXIOM Iconos R200 AXD3-340.620.13.01.02 43 / 54
Mounting the
BABIX hanger
◆ Have the wooden holder fastened to the wall with the enclosed wall plugs and
screws at a suitable place in working height.
Removing the
BABIX cradles
◆ Pull the BABIX cradle carefully out from the slot of the BABIX hanger
◆ Hold the cradle tight
◆ Lift the cradle off from the wooden hook of the hanger
◆ Place the BABIX cradle on a secure base
◆ Position the infant carefully and comfortably in the BABIX cradle
◆ Immobilize the infant securely in the cradle
◆ Check for the safe position of the infant in the BABIX cradle
◆ Bring the infant into the already prepared X-ray room for the examination.
Keeping BABIX cra-
dles
◆ Remove the infant from the cradle and attend to the infant
◆ Carry the cradle to the BABIX hanger of suitable shape and length
◆ Hook the cradle on the wooden hook with the opening towards the hanger
◆ Press the cradle at the two longitudinal sides into the slot of the hanger
◆ Check for firm seating of the BABIX cradle in the BABIX hanger.
Holder for pediatric cradle, manual
➩ See separate Operator Manual
This holder is now also available for Iconos R200.
Patient positioning mattress
Application Mattress for attachment to the grip protection strip for comfortable patient posi-
tioning.
Attachment ◆ Attach grip protection strip to head end.
◆ Place the mattress on the tabletop and pull loops over the cap screws of the
grip protection strip.
Radiation protection
value:
The attenuation equivalent is <
0.5 mm Al.
To Next Page
Loading...
