System Overview
Operating and Display Elements
26 / 44 AXD3-340.620.13.01.02 Operator Manual
❏ Display of the set compression level, only in connection with the compression
device (optional)
❏ Additional Cu filter swivelled in
❏ Cassette exposures available in film segmentation
– only with cassette spotfilm device
❏ Current position and maximum possible exposure positions in Peristepping
(optional)
❏ Fulcrum height (axial oblique projection = isocenter) or tomographic height
(optional)
❏ Selected tomographic program (angle, time)
E474 ❏ Error message
< - Longleg ❏ Scanning technique (DR scanning) selected
or
30 cm * 24 cm ❏ Display of the cassette size
System settings
❏ Compression device (optional)
– decompress
– compress
❏ without function
❏ Joystick for table tilt down/tilt up
❏ Oblique projection (cranio-caudal/caudo-cranial)
DR
To Next Page
Loading...
