Accessories
Optional Accessories
16 / 54 AXD3-340.620.13.01.02 Operator Manual
◆ Raise the leg supports to the examination position and adjust the position of
the legs inward or outward as needed.
◆ Tighten the cap screws (2).
◆ Pull and push on the leg supports and the flanges to ensure they are seated
properly.
◆ Place the leather pads over the center of the patient’s lower legs.
◆ Position the straps around the patient’s lower legs.
◆ Tighten the straps appropriately.
Removal ◆ Move the patient table to the horizontal position.
◆ Release the straps.
◆ Lift the patient’s legs from the leg supports.
◆ Wrap the straps around the leg supports.
◆ If necessary, remove the leg supports by loosening the cap screws (2).
◆ Loosen the cap screws (1).
◆ Remove the flanges from the accessory rails.
Note on biological compatibility
2
1
2
1
Please place towels between the patient’s legs and the knee crutches to avoid
direct skin contact with the knee crutches.
To Next Page
Loading...
