Siemens AXIOM Iconos R200 - Primary Collimator; Control Elements and Displays at the Front

System Overview
Operating and Display Elements
36 / 44 AXD3-340.620.13.01.02 Operator Manual
Operating indicator The unit has a green LED operating indicator on the right side above the adjusting
elements.
Errors ❏ If the LCD monitor displays no image or a blurred image, vertical lines or other
defects, please contact the SIEMENS Service.
❏ If no input signal is present, the ’No Signal’ message appears.
Primary collimator
Control elements and displays at the front
(1) Accessory rails
(2) Button for full-field light localizer and laser light localizer,
switches off automatically after 10 - 90 s (configurable)
(3) Manual setting of width and height of the radiation field
– Turning to the right opens the collimator
– Turning to the left closes the collimator
(4) Motorized prefilter selection button
(5) Display field
(6) Selection of the collimated radiation field of the last exposure
(7) Stop lever for +/-45° rotation of the collimator about the vertical axis
1
,
stop position 0°
M
1
3
8
9
1
6
5
4
7
2
1011
1
configurable by SIEMENS Uptime Service