Siemens AXIOM Iconos R200 - Select 3-Point Technique with IONTOMAT

POLYDOROS SX 65/80
Integrated Control Console
AXIOM Iconos R200 AXD3-340.620.13.01.02 25 / 36
Select 3-point technique with IONTOMAT 0
❏ Setting the kV value and the maximum mAs and ms values
❏ Exposure cut-off by the automatic exposure control.
Selection ◆ Actuate the IONTOMAT button
With organ program:
◆ Select an organ program for 3-point technique with IONTOMAT
Deselection ◆ Actuate
– the IONTOMAT button: 1-point technique is selected
With organ program:
◆ Select an organ program without 3-point technique with IONTOMAT
Exposure data
to be set
❏ The following exposure data can be set:
–kV value
–mAs value
– ms value
– Focal spot
– Tube load
– Measuring fields (dominants)
– Film-screen combination
– Film density compensation
Display of exposure
data
❏ After the end of the exposure, the mAs and ms values in the display are flash-
ing.
100%
H U
kV
73
Program
Iconos
Iconos
Cassette
Cassette
0.0
Iconos Bed
ms
ms
Iconos DFR
80%
D
mAs
20
ms25
3.4
µGy*cm
2
Info
mA
%hu
kV
45
0.3
0
min0.1
Vertix
max. value
max. value