Siemens AXIOM Iconos R200 - Page 45

System Overview
Operating and Display Elements
AXIOM Iconos R200 AXD3-340.620.13.01.02 37 / 44
(8) Buttons for entering the SID for free setting
(9) Tape measure for SID setting (cm and inch)
(10) Slide for covering the laser line light localizer
(11) Integrated measuring chamber for dose area product (optional)
(12) Manual prefilter levers at the left side (not shown )
Display field
(1) Selected = tube assembly selected
(2) Operating mode:
ACSS/PBL = with automatic format collimation,
Manual = without automatic format collimation
(3) Ready = system ready for exposure
(4) Display of the selected prefilter in mmCu if prefilter is selected using a button
or via remote control.
– Nothing is displayed in this field if the collimator is equipped with a manual
filter unit.
(5) Format display (height x width in cm or inches)
1
(6) Display of SID (in cm or inches)
1
(7) Display: Collimator centered on image receptor
2
(8) Display: Collimator rotated
2
(1)
(1)
(4)
(4)
(7) (2) (8) (3)
(5) (6)
(2) (3)
(5) (6)
1
can be configured in cm or inch by Siemens Uptime Service
2
Display function not available with all systems