Accessories
Optional Accessories
22 / 54 AXD3-340.620.13.01.02 Operator Manual
◆ Push the locking lever (1) on the rear of the footboard all the way to the stop
in the direction of the arrow.
◆ Make sure the footboard is attached firmly by pushing and pulling it.
Removal ◆ Move the tabletop to approximately the 80° position .
◆ Move the tabletop headwards.
◆ Push the locking lever (1) on the rear of the footboard in the direction of the
arrow and hold it.
◆ Remove the footboard extension.
◆ Release the locking lever.
1
1
To Next Page
Loading...
