Accessories
Optional Accessories
28 / 54 AXD3-340.620.13.01.02 Operator Manual
◆ To set the height of the IV holder push the fixing ring (2) at the removable
upper section of the IV holder upward (as shown above) and move the upper
section to the desired height.
◆ To fix the height just release the fixing ring (2).
◆ Ensure that the height-adjustable rod is seated properly and secure.
◆ Hang one or more IV’s on the loops.
Removal ◆ Move the patient table to the horizontal position.
◆ Remove the IV’s.
◆ Push the fixing ring (2) at the removable upper section of the IV holder
upward and move the upper section downward.
◆ Release the fixing ring (2).
◆ Ensure that the upper section and extension rod are secured.
◆ Loosen the cap screw (1).
◆ Lift the base of the IV holder from the accessory rail or slide it off the acces-
sory rail.
(2)
The IV holder can be used in system positions up to ± 20
o
.
To Next Page
Loading...
