Chapter 3
Device Management
RUGGEDCOM WIN
User Guide
30 Uploading Files to the FTP Server
Parameter Description
Name Displays the software component filename.
Type Synopsis: {Package, Application, VxWorks, Blob, Script, WebResource, Defaults, CDC,
Regulation, UV, GUI}
Displays the software component file type.
Version Displays the software component version number.
Section3.4.7.2
Uploading Files to the FTP Server
Use the Secondary Components screen to manage software in the Secondary memory bank. On this screen, you
can view information for the files in the memory bank, upload files from the memory bank to your FTP server, and
delete files from the memory bank.
Before uploading files to an FTP server, you must configure an FTP server on the FTP Server Properties screen.
For more information about how to configure the FTP server properties, refer to Section3.4.6, “Downloading
Software from an FTP Server” .
To upload a file to the FTP server, do the following:
1. To upload a file from the Primary bank, navigate to Management» SW Upgrade» Primary Bank. The
Primary Components screen appears.
Figure23:Primary Components Screen
Or
To upload a file from the Secondary bank, navigate to Management» SW Upgrade» Secondary Bank. The
Secondary Components screen appears.
To Next Page
Loading...
Need help?
General
