Siemens RUGGEDCOM WIN5123 User Manual

Chapter 5
Setup and Configuration
RUGGEDCOM WIN
User Guide
72 Managing SNMP Traps
1 2
Figure65:SNMP General Settings
1.Add 2.Delete
2. In the SNMPv2c list, select Enable or Disable.
3. In the SNMPv3 list, select Enable or Disable.
4. Click Apply.
Section5.12.2
Managing SNMP Traps
This section describes how to configure and manage SNMP Traps.
CONTENTS
• Section5.12.2.1, “Adding SNMP Traps”
• Section5.12.2.2, “Deleting SNMP Traps”
• Section5.12.2.3, “Viewing a List of Traps”
• Section5.12.2.4, “Configuring Traps”
• Section5.12.2.5, “Sending Traps”
Section5.12.2.1
Adding SNMP Traps
In the Managers Table, add up to five trap destination addresses. To add SNMP traps, do the following:
1. Navigate to Management» SNMP. The SNMP General Settings screen appears.

Siemens RUGGEDCOM WIN5123 Specifications

General

Brand	Siemens
Model	RUGGEDCOM WIN5123
Category	Wireless Router
Language	English