Siemens RUGGEDCOM WIN5123 User Manual

Chapter 5
Setup and Configuration
RUGGEDCOM WIN
User Guide
64 Enabling/Disabling the GPS
2
1
3 4
6
7
8
5
Figure56:Allowed BS Screen
1.Connect only to allowed BS List 2.Allowed BS List Table 3.Add Button 4.Delete Button 5.Connect only to allowed
Operator ID Box 6.Apply Button 7.Connect Button 8.Disconnect Button
3. Delete all entries in the Allowed BS List table.
4. In the Connect only to allowed Operator ID box, type the Operator ID.
5. Click Apply.
6. Click Connect.
Section5.4
Enabling/Disabling the GPS
If equipped with an integrated Global Positioning System (GPS), the device will transmit its position (latitude
and longitude) to the base station every second. The base station can then be polled using SNMP for the device's
coordinates, which can then be plotted using third party tracking software.
To enable or disable the GPS, do the following:
1. Navigate to Management» GPS» GPS. The GPS screen appears.

Siemens RUGGEDCOM WIN5123 Specifications

General

Brand	Siemens
Model	RUGGEDCOM WIN5123
Category	Wireless Router
Language	English