RUGGEDCOM WIN
User Guide
Chapter 4
System Administration
Configuring the Maximum Number of Login Attempts 39
Section4.4
Configuring the Maximum Number of Login
Attempts
To limit the number of failed login attempts before a system administrator is notified via RUGGEDCOM NMS, do
the following:
1. Navigate to Management» Access Permissions. The Device Access Permissions screen appears.
Figure33:Device Access Permissions Screen
2. In the Login retries before Trap list, select the maximum number of failed login attempts allowed by the
device.
3. Click Apply.
Section4.5
Rebooting the Device
To reboot the device, do the following:
1. Navigate to Management» System Functions. The System Functions screen appears.