RUGGEDCOM WIN
User Guide
Chapter 5
Setup and Configuration
Clearing the MAC Address Table 87
Figure82:MAC Address Table Screen
2. In the Aging time [300-1800] sec parameter, set the MAC address aging time. This is the time until table
entries are removed from the MAC address table. Type a value in the range of 300 to 1800 seconds.
3. Click Apply.
Section5.17.3
Clearing the MAC Address Table
The MAC Address Table displays the MAC addresses learned by the SS. To clear the MAC Address Table, do the
following:
1. Navigate to Network» Ethernet Settings» MAC Address Table. The MAC Address Table screen appears.
Figure83:MAC Address Table Screen