RUGGEDCOM WIN
User Guide
Chapter 4
System Administration
Configuring RADIUS User Authentication 49
1. Navigate to Management» Security» Radius Login Settings. The Radius Login Settings screen appears.
Figure45:Radius Login Settings Screen
2. Configure the following parameter(s) as required:
Parameter Description
Radius Login Synopsis: { Enable, Disable }
Enables or disables RADIUS Authentication mode.
Allow Local Login Synopsis: { Yes, No }
Enables or disables local login.
If local login is disabled, users cannot log in with the user name,
admin@local. Only users with user names configured in the
Permitted Users list can log in. For more information about the
Permitted Users list, refer to Section4.7.1, “Adding Users” .
NOTE
After local login has been disabled, users cannot
access the Security menu to enable local login while
there is an active connection to an AAA server. If
the connection to the configured AAA servers is lost,
local login will be enabled.
Login AAA IP Address The configured Web Login AAA Server IP Address.
Login AAA Port The configured Web Login AAA Server Port.
Login AAA Secret The configured Web Login AAA Server Secret.
NAS ID The Radius NAS Identifier.
3. Click Apply.
To Next Page
Loading...
Need help?
General
