SCALANCE network components
4.5 SCALANCE X Industrial Ethernet Switches
Industrial Ethernet
148 System Manual, 09/2019, C79000-G8976-C242-10
4.5.9 SCALANCE XC-100
4.5.9.1 Description
Figure 4-9 SCALANCE XC-100
The devices of the SCALANCE XC-100 product line are unmanaged Industrial Ethernet
switches for the setup of Industrial Ethernet networks with transmission rates of 10/100 Mbps
in linear or star structures. The SCALANCE XC-100 devices are suitable for applications in
which a redundancy manager is not required for a ring topology and no Gigabit Ethernet is
required.
The rear of the robust enclosure in SIMATIC S7-1500 format with IP20 degree of protection
consists of die-cast aluminum and offers all options required for installation in the industrial
environment (SIMATIC S7-1500 and S7-300 standard rail, standard DIN rail, wall mounting).
The housings have IP20 degree of protection and are designed for installation in a control
cabinet. The RJ45 sockets with securing collar provide additional strain and bend relief for
the use of FastConnect connectors.
The redundant power supply and a signaling contact with on-site operation ensure high
operational safety. An LED display provides information about supply voltage, port status
and data traffic.
Different port configurations with up to 24 RJ45 ports are available. There are also two
models available with connections for multimode fiber-optic cables (ST/BFOC or SC
interface).
4.5.9.2 Features
XC106-2
XC108
XC116
XC124
To Next Page
Loading...
Need help?
General
