EasyManua.ls Logo

Siemens SIMATIC NET - Type Designations; IEEE 802.11 R

Siemens SIMATIC NET
372 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SCALANCE network components
4.6 SCALANCE W components for the Industrial Wireless LAN
Industrial Ethernet
206 System Manual, 09/2019, C79000-G8976-C242-10
Note
In the online help of the Web
-Based Management, you will find further information on the
configuratio
n parameters of the particular SCALANCE W devices.
4.6.2 Type designations
The design and basic properties of a SCALANCE W device can be identified based on the
following type key:
Figure 4-32 Type designations of the SCALANCE W devices complying with IEEE 802.11n/ac
4.6.3 IEEE 802.11r
During roaming, the WLAN client roams from one access point to the next. A delay time of
several 100 ms can come about at the connection transition.
The following steps can be executed during this time:
Client searches for a new access point (scanning)
Logon at a new access point (authentication and association)
Allow a data connection via the new access point

Table of Contents

Other manuals for Siemens SIMATIC NET

Related product manuals