Siemens SIMATIC NET System Manual

SCALANCE network components
4.5 SCALANCE X Industrial Ethernet Switches
Industrial Ethernet
162 System Manual, 09/2019, C79000-G8976-C242-10
4.5.14.2 Features and functions
Features
The individual devices have the characteristics shown in the following table:
XC206-2 (ST/BFOC)
XC206-2 (SC)
XC208
XC216
XC224
XC216-4C
XC206-2SFP
XC206-2SFP G
XC208G
XC216-4C G
XC224-4C G
Gigabit Ethernet
-
-
●
●
Combo ports - ● - ●
Diagnostics LED
●
●
●
●
Redundant power supply ● ● ● ●
Signaling contact
●
●
●
●
Railway approval
-
-
-
-
On site display (Set button)
●
●
●
●
C-PLUG slot
●
●
●
●
● Suitable / available or according to the specified standard
The individual devices of the EEC variant have the characteristics shown in the following
table:
XC208EEC
XC216EEC
XC206-2SFP EEC
XC206-2SFP G EEC
XC208G EEC
XC216-4C G EEC
XC224-4C G EEC
Gigabit Ethernet
-
●
●
Combo ports
-
-
●
Diagnostics LED
●
●
●
Redundant power supply
●
●
●
Signaling contact
●
●
●
Railway approval
●
●
●
On site display (Set button)
●
●
●
C-PLUG slot
●
●
●
● Suitable / available or according to the specified standard
Functions
All devices have the following functions:
● Configuration with the Primary Setup Tool (PST) V3 or higher;
to use the Primary Setup Tool to assign the IP address, the switches must be accessible
via Ethernet.
● Configuration of the IP address with DHCP

Siemens SIMATIC NET Specifications

General

Category	Industrial Communication Software
Manufacturer	Siemens
Operating Systems	Windows, Linux
Protocols Supported	PROFIBUS, PROFINET, OPC UA
Compatibility	Siemens PLCs, Third-party devices with supported protocols