Communications processors for SIMATIC S7
8.3 Communications processors SINAUT ST7 for SIMATIC S7-300
Industrial Ethernet
System Manual, 09/2019, C79000-G8976-C242-10
317
8.3 Communications processors SINAUT ST7 for SIMATIC S7-300
Description
Figure 8-4 SINAUT TIM 3V-IE
The SINAUT ST7 TIM communication modules allow S7-300 stations SINAUT
communication via telecommunications networks or IP-based networks. The devices have a
rugged plastic housing with IP20 degree of protection for installation on an S7-300 standard
rail.
Features
RS 232 connections
for external data trans-
1x D-sub 9-pin 1x D-sub 9-pin 1x D-sub 9-pin 2x D-sub 9-pin 2x D-sub 9-pin
Connections for Indus-
trial Ethernet
1x RJ45 1x RJ45 1x RJ45 2x RJ45 2x RJ45
External power supply
2-pin plug-in
2-pin plug-in
2-pin plug-in
2-pin plug-in
2-pin plug-in
Number of active con-
nections multiprotocol
12 24 - 128 -
No. of TIMs per S7-
1 Multiple
1)
1 Multiple
1)
1
r according to the specified standard.
1)
Depending on the connection resources of the CPU
To Next Page
Loading...
Need help?
General
