Siemens SIMATIC NET - Features and Functions

Cloud Gateway
5.2 Features and functions
Industrial Ethernet
System Manual, 09/2019, C79000-G8976-C242-10
289
5.2 Features and functions
Features
The device has the characteristics shown in the following table:
SIMATIC CC712
SIMATIC CC716
Diagnostics LED
●
●
On site display (Set button)
●
●
Power supply 24 V DC
●
●
Redundant power supply ● ●
CLP slot
●
●
Cloud interface
1x RJ45 (1000 Mbps)
1x RJ45 (1000 Mbps)
Interface for lower-level devices:
Industrial Ethernet interface
1x RJ45 (1000 Mbps)
1x RJ45 (1000 Mbps)
PROFIBUS/MPI
-
1x RS485
Protocols:
• S7
• Modbus TCP
• MPI
●
●
-
●
●
●
Number of automation devices
1
7
Total number of data points
500
3500
● Suitable / available or according to the specified standard
Functions
● Standard 1000BASE-T, IEEE 802.3ab with transmission rates 10/100/1000 Mbps
● Half duplex/full duplex, autocrossover, autonegotiation, Quality of Service
● Configuration using the WBM
● Web diagnostics via HTTPS
● Only HTTPS connections possible
● Configuration of the IP address with DHCP
● IP addresses according to IPv4 and IPv6
● Cloud interface
● OPC UA server function
● MQTT
● S7/ ModbusTCP
● MPI (only SIMATIC CC716)
● DNS server