SCALANCE network components
4.9 Network management software
Industrial Ethernet
274 System Manual, 09/2019, C79000-G8976-C242-10
● Microsoft Windows Server 2008 R2 64-bit + Service Pack 1 (requirement: NET 3.5 or
higher is installed)
● Microsoft Windows Server 2016 Standard (Desktop representation)
● Microsoft Windows 10 Professional 64-bit
● Microsoft Windows Server 2012 R2 64-bit
Licenses
Without a license extension, you can configure four nodes with the SINEMA RC Server. In
addition, a license for SINEMA Remote Connect is included. You can increase the number of
nodes with the following licenses:
● SINEMA Remote Connect 64: This license supports up to +64 nodes.
● SINEMA Remote Connect 256: This license supports up to +256 nodes.
● SINEMA Remote Connect 1024: This license supports up to +1024 nodes.
4.9 Network management software
4.9.1 Primary Setup Tool
Description
With the Primary Setup Tool (PST), an address assignment (for example an IP address) is
made via the network for unconfigured SIMATIC NET network components, Ethernet CPs
and gateways. This is only possible if the SIMATIC NET devices have a default ETHERNET
(MAC) address and can be reached online in the network. The nodes must also support the
DCP protocol. The PST uses a filter view to allow a clear presentation of modules and
devices.
Note
The Primary Setup Tool supports only SIMATIC NET Ethernet network compon
ents with
management functionality (Web
-based Management and/or SNMP). With these
components, you also have t
he option of calling Web-based Management for diagnostics
To Next Page
Loading...
Need help?
General
