SCALANCE network components
4.5 SCALANCE X Industrial Ethernet Switches
Industrial Ethernet
174 System Manual, 09/2019, C79000-G8976-C242-10
XF204-2 BA
XF204-2 BA DNA
On site display (Set button)
● Suitable / available or according to the specified standard
Functions
All devices have the following functions:
● Configuration with the Primary Setup Tool (PST) V3 or higher;
to use the Primary Setup Tool to assign the IP address, the switches must be accessible
via Ethernet.
● Configuration of the IP address with DHCP
● Configuration with STEP 7 / TIA
● Web Based Management
● Command Line Interface / Telnet
● SNMP / SNMP-supported diagnostics
● SNTP
● Ring redundancy including RM functionality
● Standby redundancy
● Passive listening
● DHCP client
● Topology support (LLDP)
● PROFINET diagnostics
4.5.16.3 Interfaces
XF204-2BA
Basic device without BusAdapter
- - - 2
XF204-2BA DNA
Basic device without BusAdapter
- - - 2
To Next Page
Loading...
