Siemens SIMATIC NET System Manual

Appendix
A.3 Application of the standards
Industrial Ethernet
364 System Manual, 09/2019, C79000-G8976-C242-10
A.3 Application of the standards
Application of the EN standards 50173/50174
Standard
Project phase
Tasks
EN50173-1 Planning of cabling Topology, cables, connection technology, limit val-
ues for transmission links
EN50174-1
EN50174-2
EN50174-3
Planning phase Management of the cabling, safety requirements,
laying of cables, equipotential bonding)
EN50174-1
EN50174-2
EN50174-3
Implementation phase
EN501714-1 Operational phase Quality assurance, management of the cabling,
repair and maintenance
Description of the fieldbus-specific characteristics in IEC 61784
This standard references IEC 61918.
Standard
Fieldbus
IEC 61784-5-2
ControlNet, EtherNet/IP
IEC 61784-5-3
PROFIBUS, PROFINET
IEC 61784-5-6
Interbus
IEC 61784-5-10
Vnet/IP (Yokogawa)
IEC 61784-5-11
TCnet (Toshiba)
General-purpose cabling systems: EN 50173/EN 50174
Standard
Contents
EN50173-1
Part 1: General requirements
EN50173-2
Part 2: Office environment
EN50173-3
Part 3: Industrial area
EN50173-4
Part 4: Domestic environment
EN50174-5
Part 5: Computer centers
Installation of communication cabling: EN 50174
Standard
Contents
EN50174-1
Part 1 Specification and quality assurance
EN50174-2
Part 2 Installation planning and practices in buildings
EN50174-3 Part 3 Installation planning and practices outdoors

Siemens SIMATIC NET Specifications

General

Category	Industrial Communication Software
Manufacturer	Siemens
Operating Systems	Windows, Linux
Protocols Supported	PROFIBUS, PROFINET, OPC UA
Compatibility	Siemens PLCs, Third-party devices with supported protocols