Siemens SIMATIC NET System Manual

Communications processors for SIMATIC S7
8.6 Communications processors for SIMATIC S7-1500
Industrial Ethernet
330 System Manual, 09/2019, C79000-G8976-C242-10
Article numbers
Device
Description
Article number
CP 1243-1 For connecting SIMATIC S7-1200 to TeleControl
Server Basic
6GK7243-1BX30-0XE0
CP 1243-8 IRC For the connection to control room capable of ST7.
Optionally expandable with a TS module
6GK7243-8RX30-0XE0
CP 1242-7 V2 For connecting SIMATIC S7-1200 to TeleControl
Server Basic via a GSM/GPRS network
6GK7242-7KX31-0XE0
1)
CP 1243-7 LTE EU For connecting SIMATIC S7-1200 to TeleControl
Server Basic via an LTE network with the frequen-
cies used in Europe
6GK7243-7KX30-0XE0
1)
CP 1243-7 LTE US For connecting SIMATIC S7-1200 to TeleControl
Server Basic via an LTE network with the frequen-
cies used in the U.S.
6GK7243-7SX30-0XE0
1)
1)
Note the national approvals in: Approvals (https://www.siemens.com/mobilenetwork-
approvals)
8.6 Communications processors for SIMATIC S7-1500
Description
Figure 8-8 Communication processors CP 1543-1 and CP 1545-1
The communications modules for the SIMATIC S7-1500 connect the S7-1500 controllers to
Industrial Ethernet or PROFINET.

Siemens SIMATIC NET Specifications

General

Category	Industrial Communication Software
Manufacturer	Siemens
Operating Systems	Windows, Linux
Protocols Supported	PROFIBUS, PROFINET, OPC UA
Compatibility	Siemens PLCs, Third-party devices with supported protocols