Communications processors for SIMATIC S7
8.4 Communications processors for SIMATIC S7-400
Industrial Ethernet
326 System Manual, 09/2019, C79000-G8976-C242-10
Article numbers
CP 443-1 Communication processor for connection of SIMATIC S7-400 to
Industrial Ethernet 2x 10/100 Mbps RJ45; TCP/IP, ISO and
UDP; PROFINET IO controller, MRP, integrated real-time
switch ERTEC with two ports
6GK7443-1EX30-0XE0
SIPLUS CP 443-1 Communication processor for connection of SIMATIC S7-400 to
Industrial Ethernet 2x 10/100 Mbps RJ45; TCP/IP, ISO and
UDP; PROFINET IO controller, MRP, integrated real-time
switch ERTEC with two ports
Ambient temperature from 0 °C to +60 °C, for harsh environ-
6AG1443-1EX30-4XE0
CP 443-1 Advanced Communication processor for connection of the SIMATIC S7-
400 CPU to Industrial Ethernet
1x 10/100/1000 Mbps and 4x 10/ 100 Mbps RJ45 ports; ISO,
TCP, UDP, PROFINET IO controller, S7 communication; S7
routing, IP configuration via DHCP/ block; access protection
with IP ACL, with security function: Firewall and VPN
6GK7443-1GX30-0XE0
SIPLUS CP 443-1 Advanced Communication processor for connection of SIMATIC S7-400
CPU to Industrial Ethernet 1x 10/100/1000 Mbps and
4x 10/100 Mbps RJ45 ports; ISO, TCP, UDP, PROFINET IO
controller, S7 communication; S7 routing, IP configuration via
DHCP/ block; access protection with IP ACL, with security func-
tion: Firewall and VPN
Ambient temperature from 0 °C to +60 °C, for harsh environ-
6AG1443-1GX30-4XE0
CP 443-1 RNA Communication processor for connection of SIMATIC S7-400 to
Industrial Ethernet 1x 10/100 Mbps RJ45 port; TCP/ IP, ISO and
UDP, S7 communication, support of the redundancy protocol
PRP and fault-tolerant systems, SNMP V1, diagnostics, mul-
ticast, access protection with IP Access Control List for the RNA
6GK7443-1RX00-0XE0
CP 443-1 OPC UA Communication processor for connecting a SIMATIC S7-400 to
Industrial Ethernet networks via OPC UA mechanisms (Data
Access), 1x 10/100/1000 Mbps RJ45 port
6GK7443-1UX00-0XE0
To Next Page
Loading...
