Siemens SINAMICS PERFECT HARMONY GH180 - Page 164

The following menu contains the pick lists to select the variables to be displayed on the front
panel default display.
Table 6-93 Display Parameters Menu (8000) Parameters
Parameter ID Default Description
Status variable 1 8001 DEMD Select variable 1 to display on the LCD display.*
Status variable 2 8002 %SPD Select variable 2 to display on the LCD display.*
Status variable 3 8003 VLTS Select variable 3 to display on the LCD display.*
Status variable 4 8004 ITOT Select variable 4 to display on the LCD display.*
Status variable 5 8005 IMRF Select variable 5 to display on the Tool
1
display.*
Status variable 6 8006 IMRF Select variable 6 to display on the Tool
1
display.*
Status variable 7 8007 IMRF Select variable 7 to display on the Tool
1
display.*
* See Table Pick list variables for the front display.
1
Available for drive tool only.
Table Pick list variables for the front display contains the abbreviation, variable name, units and
description of the standard pick list variables used in menus such as the Historic Log Menu or the
Display Variable Menu.
The variable name column contains the name of the display variable. The content of the variable
name column is displayed as you scroll through the list of available display variables.
The abbreviation column contains an abbreviation that is displayed after a variable is selected
from the list. The abbreviation is between 3 and 4 characters in length and is displayed on the
front panel of the drive.
Table 6-94 Pick list variables for the front display
Abbreviation Variable Name Units Description
IMRF Mag current ref A Output I
ds
reference.
ITRF Trq current ref A Output I
qs
reference.
FLDS Flux DS % Motor Flux DS. Main 󹪞ux component, magnitude of 󹪞ux
vector.
FLQS Flux QS % Motor Flux QS. Quadrature component; normally close to
or at zero.
VDRF Vds reference % Motor V
ds
reference. Direct component.
VQRF Vqs reference % Motor V
qs
reference. Quadrature component.
SLIP Slip frequency % Motor slip frequency.
%SPD Motor speed %
FREQ Output Frequency Hz
RPM Motor speed rpm Motor speed with slip correction.
VLTS Motor voltage V
IMAG Mag current 󹪝ltered A Motor I
ds
󹪝ltered. Motor voltage producing current.
ITRQ Trq current 󹪝ltered A Motor I
qs
󹪝ltered. Torque producing current.
ITOT Motor current A Motor total motor current.
Parameter Assignment/Addressing
6.17 Options for Meter Menu (8)
NXGPro+ Control Manual
162 Operating Manual, A5E50491925A