Siemens SINAMICS PERFECT HARMONY GH180 - Page 165

Abbreviation Variable Name Units Description
%TRQ Torque out % Motor Torque. Percentage of rated torque.
KWO Output power kW Output power. Real output power component.
RESS Stator resistance Motor stator resistance.
DEMD Speed demand % Motor speed demand, before the ramp.
SREF Speed reference % Motor speed reference. Input to speed regulator, ramp out‐
put.
FDMD Raw 󹪞ux demand % Motor raw 󹪞ux demand.
FXRF Flux reference % Motor 󹪞ux reference.
IDIN Id input current A Input real current.
IQIN Iq input current A Input reactive current.
IAIN Phase A input current A
rms
IBIN Phase B input current A
rms
ICIN Phase C input current A
rms
IAVI Total input current A
rms
3-phase input current.
VAIN Phase A input voltage V
rms
VBIN Phase B input voltage V
rms
VCIN Phase C input voltage V
rms
VZSQ Zero sequence voltage V Input zero sequence average.
VNSD Negative sequence D voltage V Input negative sequence D voltage. Direct component of
the negative sequence input voltage, responsible for input
losses and heating.
VNSQ Negative sequence Q voltage V Input negative sequence Q voltage. Quadrature compo‐
nent of the negative sequence input voltage, responsible
for input losses and heating.
VDIN Input D voltage V
rms
Input voltage magnitude.
VQIN Input Q voltage V Input quadrature voltage. This drives the input PLL. A value
that is too high implies the PLL is not locked onto the input
voltage.
VAVI Input voltage V Input voltage. 3-phase, L-L rms voltage.
FRIN Input frequency Hz
KWIN Input power average kW
PFIN Input power factor %
HRCA Ah harmonic coe󹪟cient % Input ah harmonic.
HRCB Bh harmonic coe󹪟cient % Input bh harmonic.
HARM Total A, B harmonics % Input total harmonics.
XTHL Transformer thermal level % Input transformer thermal level.
1CRI One cycle reactive current level % Input one cycle reactive current level.
SPHI Single phasing current level % Input single phasing current level.
UNVL Under Voltage level % Input under voltage level.
EFF E󹪟ciency % Input drive e󹪟ciency.
THD Total Harmonic Distortion % Input total harmonic distortion.
VNGV Output Neutral Voltage V Output neutral to ground voltage.
%VNG Output Neutral Voltage % Output neutral to ground voltage.
SMFC Synch Motor Field Current A Motor synch motor 󹪝eld current command.
Parameter Assignment/Addressing
6.17 Options for Meter Menu (8)
NXGPro+ Control Manual
Operating Manual, A5E50491925A 163