Siemens SINAMICS PERFECT HARMONY GH180 - Page 168

Table 6-97 High Speed Recorder Menu (8220) Parameters
Parameter ID Units Default Min Max Description
Variable 1 8201 0 0 1530
Refer to section Data Table in the ToolSuite
Pro+ Manual (A5E03086439).
Variable 2 8202 0 0 1530
Variable 3 8203 0 0 1530
Variable 4 8204 0 0 1530
Variable 5 8205 0 0 1530
Variable 6 8206 0 0 1530
Variable 7 8207 0 0 1530
Variable 8 8208 0 0 1530
Recorder Enable 8209 Selection Enables the Recorder.
Refer to section Recorder Operation in
the ToolSuite Pro+ Manual
(A5E03086439).
Fast Loop Re‐
cording
8210 Selection Refer to section Recorder Operation in the
ToolSuite Pro+ Manual (A5E03086439).
Enable Trigger‐
ing
8211 Selection Refer to section Recorder Operation in the
ToolSuite Pro+ Manual (A5E03086439).
Recorder Bu󹪜er
Select
8212 Selection Refer to section Recorder Operation in the
ToolSuite Pro+ Manual (A5E03086439).
Trigger Value 8213 Selection Refer to section Recorder Operation in the
ToolSuite Pro+ Manual (A5E03086439).
Edge Select 8214 Selection Refer to section Recorder Operation in the
ToolSuite Pro+ Manual (A5E03086439).
Parameter Assignment/Addressing
6.17 Options for Meter Menu (8)
NXGPro+ Control Manual
166 Operating Manual, A5E50491925A