Siemens SINUMERIK 802D sl - Page 139

Creating a Drive Project
10.1 Creating a drive project OFFLINE
10-137
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
14.Click Continue >.
15.Select the motor type, e.g.:
– 1FK6 synchronous motor
– 1PH7 asynchronous motor
16.Select the appropriate motor from the Motor selection list box according to type
(order no.) (see rating plate) and assign a name (Drive_1_Motor).
17.Click Continue > to select the motor holding brake (see Fig. 10-23).
Synchronous
motor
Asynchronous
motor
18. Choose “Without holding
brake”.
Fig. 10-23 Configuring the motor
18.Choose Without holding brake and click Continue > to select the encoder fitted to the
motor (see Fig. 10-24).
Siemens Automation Parts