Siemens SINUMERIK 802D sl - Page 47

Dimension Drawings
5.3 Dimension drawings and drilling patterns for the NC full keyboard
5-45
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
Drilling pattern for the NC full keyboard (installed beneath the PCU)
1) M4 rivet-down, insert nut or extruded hole
2) Drill holes for fixing the position ∅ 5 mm (2x)
3) Please observe the cutting direction.
M4 (6x)
1)
146
151.9
0
U
p
3)
73
145.7
0.3
143.7
5 (2x)
2)
2
+3
0.5
303.5 302.5
295
0
7.5 8.5
Fig. 5-6 Drilling pattern for the NC full keyboard (installed next to the PCU)
Siemens Automation Parts