Siemens SINUMERIK Commissioning Manual

Tool management
6.2 Settings in the configuration file
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
209
UserDataParamName8 = TC_MOPC8
UserDataParamName9 = TC_MOPC9
UserDataParamName10 = TC_MOPC10
UserDataParamIO1 = <EndOfList>
; UserDataParamIO1 = Min:=-4, Max:=6
; UserDataParamIO2 = Min:=-10, Max:=122
UserDataParamSize = TC_MOPC_UNIT
UserDataParamSize1 = <EndOfList>
; UserDataParamSize1=TC_MOPC1_UNIT
; ...
; UserDataParamSize10=TC_MOPC10_UNIT
ApplDataParamName1 = TC_MOPCS1
ApplDataParamName2 = TC_MOPCS2
ApplDataParamName3 = TC_MOPCS3
ApplDataParamName4 = TC_MOPCS4
ApplDataParamName5 = TC_MOPCS5
ApplDataParamName6 = TC_MOPCS6
ApplDataParamName7 = TC_MOPCS7
ApplDataParamName8 = TC_MOPCS8
ApplDataParamName9 = TC_MOPCS9
ApplDataParamName10 = TC_MOPCS10
ApplDataParamIO1 = <EndOfList>
; ApplDataParamIO1 = Min:=-4, Max:=6
; ApplDataParamIO2 = Min:=-10, Max:=122
ApplDataParamSize = TC_MOPCS_UNIT
ApplDataParamSize1 = <EndOfList>
; ApplDataParamSize1=TC_MOPCS1_UNIT
; ...
; ApplDataParamSize10=TC_MOPCS10_UNIT
[MagazineOEM]
UserDataParamName1 = TC_MAPC1
UserDataParamName2 = TC_MAPC2
UserDataParamName3 = TC_MAPC3
UserDataParamName4 = TC_MAPC4
UserDataParamName5 = TC_MAPC5
UserDataParamName6 = TC_MAPC6
UserDataParamName7 = TC_MAPC7
UserDataParamName8 = TC_MAPC8
UserDataParamName9 = TC_MAPC9
UserDataParamName10 = TC_MAPC10
UserDataParamIO1 = <EndOfList>
; UserDataParamIO1 = Min:=-22, Max:=24
; UserDataParamIO2 = Min:=-10, Max:=162
UserDataParamSize = TC_MAPC_UNIT
UserDataParamSize1 = <EndOfList>
; UserDataParamSize1=TC_MAPC1_UNIT

Siemens SINUMERIK Specifications

General

Interface	Ethernet, PROFIBUS, PROFINET, USB
Programming Languages	DIN/ISO
Display	TFT color display
Compatibility	Siemens drives and motors
Software	SINUMERIK Operate
Control Unit Type	CNC (Computer Numerical Control)
Safety Functions	Integrated safety functions up to SIL 3/PLe