Siemens SINUMERIK Commissioning Manual

Tool management
6.2 Settings in the configuration file
HMI Advanced (IM4)
210 Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
; ...
; UserDataParamSize10=TC_MAPC10_UNIT
ApplDataParamName1 = TC_MAPCS1
ApplDataParamName2 = TC_MAPCS2
ApplDataParamName3 = TC_MAPCS3
ApplDataParamName4 = TC_MAPCS4
ApplDataParamName5 = TC_MAPCS5
ApplDataParamName6 = TC_MAPCS6
ApplDataParamName7 = TC_MAPCS7
ApplDataParamName8 = TC_MAPCS8
ApplDataParamName9 = TC_MAPCS9
ApplDataParamName10 = TC_MAPCS10
ApplDataParamIO1 = <EndOfList>
; ApplDataParamIO1 = Min:=-22, Max:=24
; ApplDataParamIO2 = Min:=-10, Max:=162
ApplDataParamSize = TC_MAPCS_UNIT
ApplDataParamSize1 = <EndOfList>
; ApplDataParamSize1=TC_MAPCS1_UNIT
; ...
; ApplDataParamSize10=TC_MAPCS10_UNIT
[MagazineLocOEM]
UserDataParamName1 = TC_MPPC1
UserDataParamName2 = TC_MPPC2
UserDataParamName3 = TC_MPPC3
UserDataParamName4 = TC_MPPC4
UserDataParamName5 = TC_MPPC5
UserDataParamName6 = TC_MPPC6
UserDataParamName7 = TC_MPPC7
UserDataParamName8 = TC_MPPC8
UserDataParamName9 = TC_MPPC9
UserDataParamName10 = TC_MPPC10
UserDataParamIO1 = <EndOfList>
; UserDataParamIO1 = Min:=-42, Max:=62
; UserDataParamIO2 = Min:=-210, Max:=712
UserDataParamSize = TC_MPPC_UNIT
UserDataParamSize1 = <EndOfList>
; UserDataParamSize1=TC_MPPC1_UNIT
; ...
; UserDataParamSize10=TC_MPPC10_UNIT
ApplDataParamName1 = TC_MPPCS1
ApplDataParamName2 = TC_MPPCS2
ApplDataParamName3 = TC_MPPCS3
ApplDataParamName4 = TC_MPPCS4
ApplDataParamName5 = TC_MPPCS5
ApplDataParamName6 = TC_MPPCS6
ApplDataParamName7 = TC_MPPCS7

Siemens SINUMERIK Specifications

General

Interface	Ethernet, PROFIBUS, PROFINET, USB
Programming Languages	DIN/ISO
Display	TFT color display
Compatibility	Siemens drives and motors
Software	SINUMERIK Operate
Control Unit Type	CNC (Computer Numerical Control)
Safety Functions	Integrated safety functions up to SIL 3/PLe