Siemens SINUMERIK Commissioning Manual

Tool management
6.2 Settings in the configuration file
HMI Advanced (IM4)
216 Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
1= NO, 4, NO
2= TC_TP2, 11, TC_TP2
3= TC_TP1, 5, TC_TP1
4= TC_MPP6, 5, TC_MPP6
5= CuttEdgeNo, 1, CuttEdgeNo
6= TC_DPCE, 6, TC_DPCE
7= MagNo, 4, MagNo
8= ToolInPlace, 3, ToolInPlace
9= TC_MPP2, 3, TC_MPP2
10= TC_MPP5, 4, TC_MPP5
11= TC_DP1, 11, TC_DP3
13= TC_DP4, 11, TC_DP4
14= TC_SCP13, 9, TC_SCP13
15= TC_SCP14, 9, TC_SCP14
16= TC_SCP23, 9, TC_SCP23
17= TC_SCP24, 9, TC_SCP24
18= TC_ADPT1, 11, TC_ADAPT1
19= TC_ADPT2, 11, TC_ADAPT2
20= TC_ADPT3, 11, TC_ADAPT3
21= TC_ADPT4, 4, TC_ADAPT4
22= TC_TP8_1, 1, TC_TP8_1
23= TC_TP8_2, 1, TC_TP8_2
24= TC_TP8_3, 1, TC_TP8_3
25= TC_TP8_4, 1, TC_TP8_4
26= TC_TP8_5, 1, TC_TP8_5
27= TC_TP8_8, 1, TC_TP8_8
28= <EndOfList>
[2_ActList]
MultiLine=MULTI
NrOfFixedColumns=0
NumLinesPerReq = 6
1= NO, 4, NO
2= TC_TP2, 11, TC_TP2
3= TC_TP1, 5, TC_TP1
4= TC_MPP6, 5, TC_MPP6
5= CuttEdgeNo, 1, CuttEdgeNo
6= TC_DPCE, 6, TC_DPCE
7= MagNo, 4, MagNo
8= ToolInPlace, 3, ToolInPlace
9= DLNO, 3, DLNO
10= TC_SCP3, 9, TC_SCP3
11= TC_SCP4, 9, TC_SCP4
12= <Empty>
13= <Empty>
14= TC_DP1, 4, TC_DP1
15= TC_DP2, 11, TC_DP2

Siemens SINUMERIK Specifications

General

Interface	Ethernet, PROFIBUS, PROFINET, USB
Programming Languages	DIN/ISO
Display	TFT color display
Compatibility	Siemens drives and motors
Software	SINUMERIK Operate
Control Unit Type	CNC (Computer Numerical Control)
Safety Functions	Integrated safety functions up to SIL 3/PLe