Siemens SINUMERIK

Configuring the HMI system
2.2 Configuring a channel menu
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
61
[K_2]
logNCName=NCU_1
ChanNum=2
[K_3]
logNCName=NCU_1
ChanNum=3
[K_4]
logNCName=NCU_1
ChanNum=4
;*************************** /* channel menu for TCUs
[chan HMI_1] /* common part for HMI Advanced
ShowChanMenu = true /* and HMI sl
;Channel groups
;Correlation from channel group to horizontal softkey
;-> see config.ini of the TCU
[CH_GRP_1]
Text = Process1
Member1.Target = NCU730.#1
Member1.Text = NCU730_K1
Member2.Target = NCU730.#3
Member2.Text = NCU730_K3
Member3.Target = NCU730.#4
Member3.Text = NCU730_K4
[CH_GRP_2]
Text = Process2
Member1.Target = NCU710-2.#1
Member1.Text = NCU710_K1
Member2.Target = NCU710-2.#2
Member2.Text = NCU730_K3