Ionics Instruments 2004 Page 7-4 DLM 30007-08 Rev. A
ENTER
CLEAR
HISTORY
ERRORS
STOP TOC
05:00
06 MAR 2002
FIGURE 7-2: RunTime Menu
The operation of HISTORY and ERRORS is described in the OPERATION
chapter.
Stop TOC Option
NOTE
Always stop TOC measurements before turning off or unplugging the analyzer.
Turning off the analyzer while data is being written to the RAM card may
damage the RAM card.
If the analyzer is in measurement mode, highlight the STOP TOC option and
press ENTER. You will be prompted for a password:
ENTER
CLEAR
ENTER PASSWORD
ENT= SAVE CHAR/PSWD
CLR= RESTART/EXIT
RROWS = CHANGE CHAR
FIGURE 7-3: ENTER PASSWORD Screen
To Next Page
Loading...