Sievers TOC 800 - Analog and Digital Outputs; Baud Rate Configuration

Ionics Instruments 2004 Page 5-1 DLM 30007-08 Rev. A
5 ANALOG AND DIGITAL OUTPUTS
From the SETUP menu, press the down arrow () to scroll to OUTPUTS.
Press ENTER. The OUTPUTS menu is displayed:
BAUD
A
NALOG OUT
A
LARMS
ENTER
CLEAR
DISPLAY
DATA OUT
WARNING 42
FIGURE 5-1: OUTPUTS Menu
To download data from the analyzer directly to a computer, you must set the
BAUD rate for the RS-232 port and turn on the DATA OUT option.
Baud Rate
To set the baud rate:
1. From the OUTPUTS menu, use the arrows ( or ) to scroll to
BAUD and press ENTER. The BAUD RATE SETTING screen is
displayed:
BAUD RATE SETTING
ENTER
CLEAR
BAUD RATE: 9600
CHANGE TO:
9600
A
RROWS TO CHANGE:
ENT=SET, CLR=EXIT
FIGURE 5-2: BAUD RATE SETTING Screen