Ionics Instruments 2004 C-9 DLM 30007-08 Rev. A
Alarm Settings
Once in TURBO mode, from the SETUP menu select OUTPUTS, then select
ALARMS. The settings are displayed as follows:
ALARM OFF
ALARM ON ERROR
TOC ABOVE
TC ABOVE
IC ABOVE
OFF LINE ALARM
Follow the directions in the Installation chapter for the setup and wiring of
alarms.
Accuracy Specifications
When operated in Turbo mode, the analyzer has the following accuracy
specifications:
@ 2.0 ppm ± 5%
@ 200 ppb ± 15%
Precision is ± 3% at all levels.
To Next Page
Loading...