Ionics Instruments 2004 Page 2-2 DLM 30007-08 Rev. A
2 SYSTEM SPECIFICATIONS
Detection limit..........................................0.05 ppb TOC
On-Line TOC Precision ...........................± 3% of Total Carbon value
On-Line TOC Accuracy ...........................± 3% of TC value (TC > 100 ppb)
Interferences ...........................................Insensitive to halogenated
hydrocarbon interference
Linear range ............................................0.05 – 50,000 ppb TOC
Analysis Time .........................................6 minutes
Sample Temperature...............................1 to 100°C
Ambient Temperature..............................10 to 40°C
Sample Pressure.....................................Up to 100 psi
Sample Flow Rate…………………………30 to 220 mL/min
Internal Sample Flow Rate......................0.35mL/minute
Maximum Relative Humidity....................80% at 31°C; 50% at 40°C
Maximum Altitude....................................up to 3,048m
Calibration Stability..................................Typically stable for 12 months
Chemical Reagents.................................Prepackaged, 3-month supply
Outputs....................................................0–10 V and 4–20 mA, RS-232,
parallel printer port, alarms
Power requirements
Model 800 120 V, 150 watts, 60 Hz
Model 810 100 V, 150 watts, 50/60 Hz
Model 820 230 V(±10%), 150 watts, 50/60
Hz
To Next Page
Loading...
Need help?
General
