Sievers TOC 800 - Page 84

Ionics Instruments 2004 Page 5-10 DLM 30007-08 Rev. A
SET OUTPUT VALUE
ENTER
CLEAR
CURRENT: TOC OUTPUT
NEW: IC OUTPUT
ENT = CHANGE, CLR = EXIT
A
RROWS = SELECT TYPE
FIGURE 5-9: SET OUTPUT VALUE Screen
3. Use the arrows ( or ) to select the value to be sent to the analog
output (TOC, TC or IC). Press ENTER. The current output will
change to indicate the new analog output. The program will prompt
for confirmation. Press ENTER to save, or press CLEAR to return to
the ANALOG OUTPUT menu.
4. Use the arrows ( or ) to scroll to the SET RANGE option. Press
ENTER. The ANALOG OUTPOUT RANGE (minimum value) screen
is displayed:
A
NALOG OUTPUT RANGE
IN PPB
ENTER
CLEAR
CURSOR
ENT = SAVE CHAR/NUM
CLR = RESTART/EXIT
A
RROW = CHANGE CHAR
MIN = 0
FIGURE 5-10: ANALOG OUTPUT RANGE Screen (Minimum Value)