SIPOS SEVEN 2SA7 - Spare Parts; General Information; Spare Parts List

Y070.302/EN Page 113
Operation instructions
SIPOS SEVEN: PROFITRON, HiMod
15
Spare parts
15 Spare parts
15 Spare parts
15�1 General information
With the exception of standardized, generally available components, only original spare parts may
be used. Spare parts are usually supplied as complete sub-assemblies (see list below). In the fol-
lowingrepresentationdrawings,designationswith3digitsarelisted.Thesenumbersareprexed
with "2SY7" to give the full spare parts designation.
When ordering spare parts, always provide the following information:
1. Order number and serial number of the actuator (refer to name plate),
2. Spare parts designation 2SY7 . . . (refer to following list),
3. Quantity required.
■
All external metallic housing parts are made of a corrosion resistant aluminum alloy, painted
with color similar to RAL 7037 (silver-gray) as standard and meet the requirements up to cor-
rosivity category C5.
■
Othernishpaintcolor ►add.versionY35
■
Very high corrosion protection
corrosivitycategoryC5withlongprotectionduration ►add.versionL38
15�2 Spare parts list
Our actuators are designed for fault-free operation within the maintenance intervals. As we know
from experience, external causes may damage the actuator already during commissioning stage.
For such events, the recommended spare parts are listed in the following table. If you require other
parts, please contact our service.
No� Designation
2SY7001 Electronics unit (010 – 042)
2SY7041 Cover for electronics unit
2SY7218 Sealing kit (without illustration)
2SY7219 Non-intrusive position encoder (niP)
2SY7220 Signaling gear
2SY7225 Signaling gear cover
2SY7250 Manual drive
2SY7252 Handle
 = The last three digits indicate the part numbers in the exploded views.