SIPOS SEVEN 2SA7 - Select Additional Gear and Change Parameters

Y070.302/EN Page 37
Operation instructions
SIPOS SEVEN: PROFITRON, HiMod
7
Commissioning
7 Commissioning
7�2 Additional gear
Select additional gear operation se-
quence
1. Select'Parameter'inthe“Mainmenu”(g.2,
item 1) andconrm(2).
The 'Parameter' menu opens.
2. Select “Additional gear“ menu item (3) and
conrm(4).
Display changes to the 'Additional gear’
menu.
– If the additional gear has not yet been
selected, “No additional gear” is displayed
under the ‘Gear type’ menu item.
– If the additional gear has been selected,
gear type, model and the respective
parameters will be displayed.
3. Set selection marker below 'Gear type’
parameter. In our example to ‘No additional
gear‘ (5)andconrm(6).
The following options appear:
– No additional gear
– Rotary gearbox
– Part-turn gearbox
– Linear thrust unit
4. Select ‘Gear type’, in our example ’Part-turn
gearbox‘ (7)andconrm(8).
Display changes to 'Additional gear’. Now,
the model can be selected.
5. Select model (9)andconrm(10).
The display changes to the ‘Model’ menu
with the available model options for this
actuator. The current parameter value is
ticked
.
6. Select model *:
a) Select model from list (11)andconrm
selection (12).
The display changes to the previous
screen; now suitable parameter values
for the selected model will be set and
displayed.
or
b) If the connected gear is not included in
thelist,select“Userdened”.Thedisplay
returns to “Additional gear”.
Now the parameter values for the addi-
tional gear can be set individually, refer to
the following description.
* BZ = Version with gear wheel made of bronze.
Main menu
Parameter
Additional gear
No additional gear
Types of gearings
Fig� 1: Navigation to “Additional gear; gear
type“
Fig� 2: Select additional gear
7�2�1 Select additional gear and change parameters