SIPOS SEVEN 2SA7 - Scope; Supplementary Operation Instructions

Operation instructions
SIPOS SEVEN: PROFITRON, HiMod
Page 6 Y070.302/EN
1 General information
1
General information
1�4�2 Scope
For the sake of clarity, not all details of all versions of the product are described in these operation
instructions, nor can they cover all conceivable cases regarding installation, operation and mainte-
nance.Forthisreason,theoperationinstructionsonlycontaininstructionsforqualiedpersonnel
(refer to section 1.1) that are necessary when the equipment is used for the purpose for which it is
intended or in industrial applications.
If the devices are used in non-industrial applications with increased safety requirements, they have
to be ensured by additional safety measures during assembly.
In case of any questions, and especially where detailed product information is not available, contact
the sales representative in charge. Always state the type designation and the serial number of the
respective actuator (see name plate).
It is recommended that the services and support of the responsible SIPOS Aktorik service centers
are utilized for all planning, installation, commissioning and service tasks.
The contents of these operation instructions and product documentation shall not become part of or
modify any prior or existing agreement, commitment or legal relationship. The Purchase Agreement
contains the complete and exclusive regulation on material defect liability of SIPOS Aktorik. These
contractual regulations are neither amended nor limited by the descriptions contained in these
operation instructions and documentation.
1�5 Supplementary operation instructions
2SG7 small electric part-turn actuators
2SQ7 small electric part-turn actuator
COM-SIPOS PC parameterization software
PROFIBUS operation instructions
MODBUS operation instructions
HART operation instructions
Enclosure protection IP68-8 m "K51“
Increased vibration resistance "K57“, "K58“
Increased vibration resistance according to seismic class S2A "K59“
Very high corrosion protection
corrosivity category C5 with long protection duration "L38"
SIPOS SEVEN with USP
Binary and analog inputs freely available via bus
and other
Any special installation and operation instructions furnished by the suppliers of subcontracted com-
ponents,attachmentsorxturesareattachedtothesetofinstructionsandhavetobeobserved.