Operation instructions
SIPOS SEVEN: PROFITRON, HiMod
Page 76 Y070.302/EN
8 Parameters and possible parameter values
8.3 Parameters for the DCS
8
Parameters and possible parameter values
Monitoring time
Connection control time, possible setting:
0.0 to 25.5 s.
The monitoring is switched off for ‚0‘ setting.
3.0 s are set in the factory.
HART
Only for available HART interface.
For more detailed information, refer to HART
operation instructions.
Address
Can be set from 0 s to 63 s.
Set to 0 in the factory.
Monitoring time
Monitoring time can be set from
0 to 3,600 s; whereas the monitoring is
switched off for ‚0‘ setting.
0 s are set in the factory.
Monitoring time
0.0 s – 25.5 s
Address
Monitoring time
HART communication
Control system
HART
Fig�: ‘HART’ menu
Monitoring time
HART communication
Address
To Next Page
Loading...
