Ski-Doo 2005 SUMMIT HIGHMARK User Manual

Section 04 ENGINE MANAGEMENT (SDI)
Subsection 03 (COMPONENT INSPECTION, REPLACEMENT AND ADJUSTMENT)
COMPONENT INSPECTION,
REPLACEMENT AND ADJUSTMENT
SERVICE TOOLS
Description Part Number Page
ECM adapter.........................................................................
420 277 010 ......................................... 138
Fluke 111.............................................................................. 529 035 868 ......................................... 137
hose pinchers ......................................................................
295 000 076 ......................................... 146
VCK (Vehicle Communication Kit).........................................
529 035 981 ......................................... 135
SERVICE PRODUCTS
Description Part Number Page
dielectric grease ...................................................................
293 550 004 ......................................... 143
Loctite 5910.......................................................................... 293 800 081
................................. 151, 154
pulley flange cleaner.............................................................
413 711 809 ......................................... 147
GENERAL
Engine problems are not necessarily related to the
engine management system.
It is important to ensure that the mechanical in-
tegrity of the engine and drive system are present:
– good transmission system operation
– good engine compression and properly operat-
ing mechanical components, no leaks etc.
– fuel pump connection and fuel lines without
leaks.
When replacing a component, always check its
operation after installation.
FUEL SYSTEM

WARNING
The fuel system of a fuel injection system
holds much more pressure than that of a car-
bureted snowmobile. Prior to disconnecting
a hose or to removing a component from
the fuel system, follow the recommenda-
tion described here. Pay attention that some
hoses may have more than one clamp at their
ends. Ensure to reinstall the same quantity
of clamps at assembly.
– UsetheVCK(VehicleCommunicationKit)
(P/N 529 035 981) to release the fuel pressure
in the system. Look in the Activation section
of the software B.U.D.S. (ensure to use the
latest version available on BOSSWeb).
mmr2005-126 135

Ski-Doo 2005 SUMMIT HIGHMARK Specifications

General

Brand	Ski-Doo
Model	2005 SUMMIT HIGHMARK
Category	Offroad Vehicle
Language	English