Section09BODY/FRAME
Subsection 01 (BODY)
BODY
SERVICE TOOLS
Description Part Number Page
adjustment wrench...............................................................
529 035 891 ......................................... 307
Supertanium™ drill bit ..........................................................
529 031 800 ......................................... 306
DECAL
To remove a decal; heat old decal with a heat gun
and peel off slowly.
Using isopropyl alcohol, clean the surface and dry
thoroughly.
Apply liquid soap to new decal and carefully po-
sition the decal. Using a sponge or a squeegee,
remove the air bubbles and surplus water work-
ing from the center toward the edges. Allow to
air dry.
CAUTION: Do not apply isopropyl alcohol or
solvent directly on decals. Use only in a well
ventilated area.
HOOD
Removal
Remove bolts retaining hood hinge to front
bumper.
A35H08A
1
1. Hinge bolt
Remove hood.
Installation
The installation is the reverse of removal proce-
dure.
FRONT BUMPER
Removal
Remove hood.
Unscrew bolts retaining front bumper to frame.
A35H09A
1
2
1
2
3
1. Bumper bolts
2. Hinge bolts
3. Frame
Remove bolts near upper shock absorber brack-
ets.
mmr2005-143 305
To Next Page
Loading...
