EasyManua.ls Logo

Solcon HRVS-DN series - Main Features, Options and Advantages

Default Icon
181 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11 • Introduction
_______________________________________________________________________________________________
Main Features, Options and Advantages
Advantages at a Glance
❍ Complete line of 60-1,200A, 2,300-15,000V as
standard products
❍ Customized soft starters (consult the factory
for details)
❍ Heavy duty, fully rated design
❍ Starting capacity of 400% of FLC for 30
seconds at a rated ambient temperature of 50°C
❍ Preparation for bypass - to maintain protection
when bypass is closed
❍ Robust construction
❍ Superior starting & stopping characteristics
❍ Comprehensive motor protection package
❍ User friendly
❍ Unique protection for corrosive environments
❍ Generator ready - auto frequency tracking
❍ Sustains variations of 45-65Hz while starting
❍ Unique built in optional features including:
❍ Motor insulation tester
❍ Modbus / Profibus /DeviceNet comm.
❍ Analog output
❍ Relay PCB for comm. control
❍ Tacho feedback
❍ Multi-start (standard)and Multi-soft
stop (optional) capability
❍ Synchronous motor excitation system
control
❍ Remote display
Standard Ratings
❍ 2.3kV, 4.16kV, 6kV, 6.6kV, 10kV,11kV,
13.2kV, 13.8kV, 15kV
Starting & Stopping
❍ Soft start & soft stop
❍ Current limit
❍ Pump control program
❍ Torque and current control for optimized
starting & stopping process
❍ Dual adjustments - two starting & stopping
characteristics
❍ Advanced pulse start
❍ Linear acceleration
Motor & Starter Protection
❍ Too many starts
Coast Down Time
❍ Long start time (stall)
❍ Shear-pin
❍ Electronic overload with selectable curves
according to IEC classes or NEMA classes
❍ Under current with adjustable delay
❍ Unbalance current with adjustable delay
❍ Ground fault with adjustable delay
❍ Phase loss & phase sequence
❍ Under, over & no voltage
❍ Load loss (motor not connected)
❍ Shorted SCR
❍ Starter over-temperature
Displays LCD & LEDs
❍ Illuminated LCD - 2 lines x 16 characters
❍ Selectable languages: English, German, French,
Spanish and Turkish (Chinese and Russian - optional)
❍ Two display modes for basic and advanced
applications
❍ Friendly operation with default parameters
❍ Eight LEDs for quick operational status
❍ Statistical data including:
❍ Total run time
❍ Total number of starts
❍ Total number of trips
❍ Last start current
❍ Last start time
❍ Last 10 trips with time stamp
❍ Current at trip

Table of Contents